News:

Welcome to our club, we are always looking for improvements to the site, if you have any suggestions please post them up...

Main Menu

Engine weight

Started by Coyoteboy, July 23, 2010, 02:42:13 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Coyoteboy

So I've been trying to sus out the exact weight of a 3S-GTE and numerous sources quote remarkably similar values, ranging from 125 to 135kg, though some quote with and some quote without tubby and manifolds etc which I would expect would make a hell of a difference. Having tried to pick one up I'd say it's about right by feel, but that's hardly accurate. But what confuses me more is the fact that the VW 1.4TSI engine is hailed as a miracle engine due to its power/weight ratio and VWs own figures rate it at 126kg. WTF? Either the 3S is WAY heavier than several people have measured (?) or something fishy is going on. I know the MR2 transmission is ~80Kg, which makes a hell of a difference when they are compared as a package, but I was always under the impression the 3S was a heavy iron lump shunned from lightweight cars, could this be primarily down to the box being almost as heavy as the engine in fact?

(still trying to decide on kit layouts).

White '91 185, 205 gearbox and Rev2 Mr2 Tubby Engine, CT20b. Megasquirted @ 14psi.

karbon

Im pretty sure the lump, bare, would weigh in around the 125kg mark, i lifted mine when i stripped it, there was block, head and some minor bits, and believe me, it was fecking heavy!
Gaffer tape is like "the force" - it has a light side, a dark side and it holds the universe together.

There's nothing that shouts "Poor Workmanship"  more than wrinkles in the gaffer tape.....

ChrisW

Well, just been in the garage:

Heatshield is 2kg
Ex manifold is 6kg
Head without rocker cover is 27kg

It's a start, lol


www.wefixalloys.co.uk
www.facebook.com/WeFixAlloysNewcastle
ST185 Jap Grey(his) 401bhp and 350lbft at 1.5bar
ST185 Jap Grey(hers) 276bhp and 270lbft

Coyoteboy

Swear I'm going to pull it back out and weigh it at this rate!

White '91 185, 205 gearbox and Rev2 Mr2 Tubby Engine, CT20b. Megasquirted @ 14psi.

Frikkin Evil

Quote from: Coyoteboy on July 23, 2010, 02:05:39 PM
Swear I'm going to pull it back out and weigh it at this rate!

Oo-er.  :o

Coyoteboy


White '91 185, 205 gearbox and Rev2 Mr2 Tubby Engine, CT20b. Megasquirted @ 14psi.

flyingtele

I have a block, crank, and four pistons with rods in the garage. I'll get the scales out and measure them if I remember, and then we might come to some conclusions :)