GT4EC - The GT-Four Enthusiasts Club

General Category => The Chill Out Room => Topic started by: silverspeed on February 10, 2010, 04:52:55 pm

Title: Phone line...
Post by: silverspeed on February 10, 2010, 04:52:55 pm

Is thier any bt engineers in ere.? I have a question.

Title: Re: Phone line...
Post by: martyn_pryor on February 10, 2010, 10:43:16 pm

I can try, I used to be a phone engineer, but not for BT.

What is your trouble ?

Title: Re: Phone line...
Post by: silverspeed on February 14, 2010, 12:07:34 pm

 :D

my questions are..
1) Is their a maximum distance of (drop) cable between.. master interface and master 1st socket.?

2) Adding extra sockets.. do they all need to be LJU1/1A,2,3,4 ect ect
 Master IDC Socket, with a capacitor, resistor and surge arrestor, to keep with bt regulations.?? or can others be used.?
 

Title: Re: Phone line...
Post by: martyn_pryor on February 14, 2010, 01:46:36 pm

Hi Pete,

I'll check with someone else about the maximum distance, but I think it may be about 50 metres.

If you want to add extra sockets, I'd personally add LJU 2/1 +2 a's But I think you can only add a maximum of 6, and if you were to add 6, I'd use 3 x 2/1a and 2x 2/2a

Below is a link for phone sockets

http://en.wikipedia.org/wiki/British_telephone_sockets (http://en.wikipedia.org/wiki/British_telephone_sockets)

Title: Re: Phone line...
Post by: silverspeed on February 14, 2010, 02:22:07 pm

Cheers mate...

I'm putting in a new master and one slave socket with a second line for broardband as me girt will be working from home.