GT4EC - The GT-Four Enthusiasts Club
General Category => The Chill Out Room => Topic started by: Driveby on October 31, 2009, 04:50:41 pm
-
I was wondering what you guys would have if you had the choice, wether they be OEM or after market, Nissan, Mitsubishi, Mazda whatever, post pics of the wheel if you can on whatever car.
They dont have to be Celica fitment as where theres a will and a credit card ;)...
-
THESE (http://www.carzi.com/2008/10/01/carbon-fiber-wheels) 8)
-
I think these would look good on your car and not too expensive. I'd go for et35 front and et30 rear for best looks/handling and to avoid catching the wheel arches..
http://www.rallysport.com/mall/productpage.cfm/Rallysport/_8x18%20Toyota%20Celica/239439/Revolution%208x18%20Toyota%20Celica%20ST205%20Alloys (http://www.rallysport.com/mall/productpage.cfm/Rallysport/_8x18%20Toyota%20Celica/239439/Revolution%208x18%20Toyota%20Celica%20ST205%20Alloys)
I also like bronze coloured wheels like in the attached picture which are Work Emotion XD9
Simon
-
I like these Advan RG2's
(http://www.evo8.com/v/vspfiles/photos/YOK%20ADVAN%20RG2-2.jpg)
-
I like these Advan RG2's
(http://www.evo8.com/v/vspfiles/photos/YOK%20ADVAN%20RG2-2.jpg)
Holy feck they're nice wheels!
-
I love these BBS CH wheels
http://www.harrisonmotorsports.com/shop/images/CH_DSK_sm.jpg (http://www.harrisonmotorsports.com/shop/images/CH_DSK_sm.jpg)
-
My choice of wheels would be OZ roulettes and I have OZ roulettes fitted ;)
Given the choice I'd probably go for 17's maybe but the 16's suit the 165 very well :)
-
Slightly realistic ones? ...I have them on the way from Japan as we speak :D
Unrealistic ones?...
(http://www.evosport.com/projects/Mercedes/clk63black/images/large_dymag4.jpg)
-
Carbon rims are stunning and so unbelievably lightweight they must make the suspension and accel/braking so much better, but really not sensible for street use due to damage etc.
I still like the old 17" oz 5 spokes. Not a fan of roulettes, as they look a bit too steel-wheely
-
Slightly realistic ones? ...I have them on the way from Japan as we speak :D
Unrealistic ones?...
(http://www.evosport.com/projects/Mercedes/clk63black/images/large_dymag4.jpg)
These are certainly jizz worthy ;D
Would love some ultra lightweight carbon rims ;) How much if you don't mind me asking?
-
You can get carbon-effect ones for buttons.
-
Kinda no point then unless you are 17 driving a saxo ;D
-
Correct :)
-
Slightly realistic ones? ...I have them on the way from Japan as we speak :D
Unrealistic ones?...
(http://www.evosport.com/projects/Mercedes/clk63black/images/large_dymag4.jpg)
These are certainly jizz worthy ;D
Would love some ultra lightweight carbon rims ;) How much if you don't mind me asking?
Those ones are about £5k I think :'(
-
Rather upsetting if you kerbed them
-
Some nice iconic JDM rims here http://speedhunters.com/archive/2008/09/05/the-101-gt-gt-cool-japanese-wheels-pt-2.aspx (http://speedhunters.com/archive/2008/09/05/the-101-gt-gt-cool-japanese-wheels-pt-2.aspx)
-
Always liked the TE37's ;)
-
My TE37's might be up for sale when my new wheels arrive (pending me liking them better than the Volks :o)
-
Do we get a clue to your new ones Driveby?
-
My TE37's might be up for sale when my new wheels arrive (pending me liking them better than the Volks :o)
Tell me more...
Had them on the CS but they were only 16's and 17's would look soooo much nicer. I can use them on the 165 or even the 162 ;) they would look spot on :)
-
Ive bought some Advan RGII's (the ones I posted the pick of)
Wiggy the TE37's are 16" mate, I dont know if this means your not interested?
-
Not my old ones are they....lol
Send me a piccie ;) Might stick them on the 162 :)
-
Your old ones as in the ones that were on Jeff's CS? From what I remember looking at them they werent the correct offset?
Doesnt matter anyway as they arent those :) These are pretty much mint apart from the usual bit of sticker degradation.
(http://i25.photobucket.com/albums/c68/Driveby1/IMG_5093-1.jpg)
-
Yep, them ones off Jeff... And yes the offset was wrong, think they were from a scoobie? They fit my CS ok though, just looked a little odd on the back because they didn't fill the fat arch...
So, wonga time - what you after for them and whats the tyre size? The tyres may be no use because a 205 rolling radius is too big for a 165/162.
PM me if you prefer ;)