GT4EC - The GT-Four Enthusiasts Club

General Category => New to GT4EC? => Topic started by: sandy white on July 30, 2008, 07:39:16 pm

Title: newby
Post by: sandy white on July 30, 2008, 07:39:16 pm

hi folks.new to the site.it got recommended to me.
i'm from the uk.i own an st185 and was wanting to fit a fmic but i need hard pipes made and was wondering if there is anywhere you can buy the ready made up.
any help would be appreciated.
cheers in advance sandy.

Title: Re: newby
Post by: nev520 on July 30, 2008, 08:52:02 pm

Welcome to the club matey :)
I'm sure one of the resident car buffs will be able to assist with your enquiry.

Title: Re: newby
Post by: paul_gt4 on July 30, 2008, 09:08:07 pm

wttc buddy, it would be easier and alot less expensive if you made them yourself check a good metal fabricator locally to yourself for a good price

Title: Re: newby
Post by: ChrisW on July 30, 2008, 10:18:55 pm

Hi Sandy, welcome to the club. I'm getting my 185 fitted with an FMIC as we speak. Do you have the stock bumper or have you gone for the CS bumper? Could use mine as a template with a few samco joints in?

Cheers

Title: Re: newby
Post by: peterp1per on July 30, 2008, 10:28:35 pm

welcome to the club mate  ;)

i made my intercooler pipes from a universal pipe kit from ebay and then bought samco pipes in various angles needed to join it all together.

(http://img106.imageshack.us/img106/3434/frontmountov0.jpg)
(http://img511.imageshack.us/img511/3248/airbox3uo4.jpg)

Title: Re: newby
Post by: The Doctor on July 30, 2008, 11:27:07 pm

Welcome to the club Sandy 8)

Title: Re: newby
Post by: bronzie on July 31, 2008, 09:13:57 am

For a custom type kit you can try and PM Datajon.

This post has been edited.