GT4EC - The GT-Four Enthusiasts Club

General Category => The Chill Out Room => Topic started by: bazza2541 on February 24, 2008, 02:17:23 pm

Title: Price of rebuild.
Post by: bazza2541 on February 24, 2008, 02:17:23 pm

I didn't know where to post this one, so.......................

I am pricing parts to rebuild Pauls ATA engine, local pricing has been a bit sporadic ranging from £6k to £9k from those who bothered to give me a price at all.
So thinking that I was buying bits made from unobtainium, I went on the hunt for parts, which inevitably led to our American cousins.
A place in California called top end performance gave me this.

JE Forged pistons.. .to my compression ratio and overbore size, treated to cope with N2O.
Total-Seal Gapless Rings.
Clevite77 Rod and Main Bearings and Thrust Washers.
Cometic metal head gasket.
Full Engine Gasket Set with Steel Shim Head Gasket.
ARP Head Studs,
ARP Rod Bolts,
(16 ) Stainless Steel Valves, treated to cope with N2O
Timing Belt,
Tensioner bearing,
Idler bearing,
Water pump,
ARP Flywheel bolts
and Pauter OR Carillo Forged Connecting Rod Set.
For the princely sum of $2760 shipping included.
Thats £1403.52 in Queens head pounds or €1860.65 in proper money.
So with a mechanic mate quoting approx 40 hours to do the rebuild, the question is, WTF?

Why are the other guys so damned expensive?

Title: Re: Price of rebuild.
Post by: silverspeed on February 24, 2008, 02:38:49 pm

most people work for £40 per hour.. thats in Pound sterling not funny money...

Title: Re: Price of rebuild.
Post by: bazza2541 on February 24, 2008, 02:46:41 pm

Ok, so in your Queens head pounds then 40hours at £40 is £1600 plus parts £1403.52 is £3003.52 still along bit away from what I have been quoted.
Am I missing something here?

Title: Re: Price of rebuild.
Post by: paul_gt4 on February 24, 2008, 03:03:35 pm

price at ecc for full rebuild for me with hydra mapped came to £9200 all in with 2.2 stroker kit but i'm doing what your doing atm saving like mad and buying over there in the US from a place in Dallas (US want $1720 ECC want £1750 do your maths and don't worry about import duty have that sorted), only thing i wasn't quoted for was a turbo

Title: Re: Price of rebuild.
Post by: bazza2541 on February 24, 2008, 03:05:40 pm

I will be coming home every 8 weeks if you need a (cough) (cough) mule.

Title: Re: Price of rebuild.
Post by: paul_gt4 on February 24, 2008, 03:10:49 pm

i know i know have friend from the time i live in louisiana coming over in the summer so getting posted to them and they're more than likely going to bring it for me........ still have to confirm that but your still on the cards