GT4EC - The GT-Four Enthusiasts Club
Trotters Paradise => Parts For Sale => Topic started by: bigfub on January 12, 2008, 05:30:50 pm
-
Spare turbo, refurbished approx 20K miles ago. Current condition unknown £50 - Prov. Sold
Turbo from car – full working order £100 - Prov Sold
Spare head – skimmed but needs valve regrind etc £60
Head from engine. Full working order. £60
Rear diff £30
Inlet manifold £20
Exhaust manifold £20 - Prov. Sold
Cat £10
Scorpion cat back SS Exhaust 7-8 years old but no leaks £30 Prov. Sold
Injectors x4 £10 (2 sets)
Fuel rail £10
Fuel pump £10
Charge cooler pump £15
Charge cooler £20
Radiator, no fan £15 - Prov Sold
Distributor £10 - Prov. Sold
JDM ECU £10
UK ECU £10
Alternator £20 - Prov. Sold
Starter motor £20 - Prov Sold
Engine wiring loom with all connecters present £20 - Prov. Sold
AFM £10
Bumper Front and rear £10 each
Doors with glass £10 each
Door cards £10 each
Carpets £5
Front seats £20 the pair
Rear seats £10
Gearbox + transfer £100
Driveshafts £15 each
Propshaft £15
Heater matrix – reconditioned 12 months ago £40
Parts already provisionally gone -
Headlights. Bonnet. O/S door trim. O/S rear window trim. Spoiler. Bonnet. Chargecooler radiator. Front Celica Trim. Rear No. plate surround. Rear lights & grilles. Front indicators. Boot hinges. VSV. Bottom end of engine.
-
I'll have them bolts from the rear hub fella. e-mail me at pwigzell@gmail.com and I'll send you over an image from the EPC pointing out the ones I need. Also, let me know how much and I'll fire the money over via paypal. I'm soooooo in need of these m8, my rear suspension is all over the place becasue some idiot fitted the wrong bolts....
Cheers ;)
-
Here's the pic m8, I need all the bolts marked with a red dot.
If you could let me know how much and where to send cash too I'll do it ASAP. Also, if you could number them or something so I know which is which....Cheers
(http://i19.photobucket.com/albums/b164/boostmad/bolts.jpg)
-
tbh I don't know what condition they're in. If they're halfway usable then you can have them for the cost of the postage and if that's not a lot, then you can have them for nowt ;)
The only proviso is that you may have to be patient as this weekend will be the very 1st proper opportunity I get to start stripping bits :)
-
Hi m8
Condition isn't really a problem, because at least they will fit correctly ;) Unlike the ones in at the mo >:(
Let me know when you have them off and where to send the cash m8 ;) I'm sort of in a rush but not too bad, I just can't really use the car until its done but I have another car to use.
Cheers, owe ya one ;)
-
Breaking starts this weekend :(
-
My postcode is BT828AE, for the postage of the hinges.
Just need to know how much.
Cheers.
-
Breaking starts today ;) Let you know asap but I can't imagine it being a lot :)
-
Hi m8, my postcode is TR9 6SX for postage....again, let me know cost for nuts and bolts and I'll fire over the cash....
Cheers m8 ;)
-
Well, the engine is out and gone and some bits have been taken off. :)
Next weekend will be up on axle stands for removal of driveshafts, hubs etc ;)
-
Now looking at 40 + postage for each of the heads. One UK & one JDM ;)
-
message me your paypal address and a price for the hinges please?
Cheers.
-
Payment sent.
Cheers.
-
Hi m8
Just remembered, do you have the drivers wing mirror glass in tact? I only need the mirror not the actual body. Let me know on top of the rear hub nuts and bolts what you want for it.
I also need your paypal addy fella ;)
cheers
-
She'll going to the scrapyard next week. If you still need bits then please come and remove them or let me know what you're after.
-
Up on axle stands now. Will try and get the last few bits off tomorrow.
Gaz & B, all your bits are off except the bonnet which I'll whip off at the last moment ;)
-
That's it, if it's not off the car now then it's unlikely to be coming off :( I've run out of time and patience & I have the cuts & bruises to show for it ;)
Wiggy - I've got your mirror but the bolts are proving problematic
Bazza - I've loosened the bolts holding the hinges but I need a 2nd pair of hands to get them off ;)
-
Ohh crap, please don't say that :'(
Your my last hope for them bolts, can you get any of them? The ones that attach the arms to the hub are the ones I really need. If you can remove them, brilliant :D
-
Your my last hope for them bolts, can you get any of them?
Wiggy, next time your oop north spare me a few hours ;)
You could come over to mine and we'll route through the boxes of bits I have left over from the Celica. I'm sure they will be there just dont know what they look like really and where to start LOL.
I'm sure with our 2 half brains on the job we can make a good crack at it :D
-
Nothing is impossible but it's dark when I get home and working by torchlight is never ideal.
There is another one being broken on ebay at the moment, so it might be worth dropping them a line too?
-
Nothing is impossible but it's dark when I get home and working by torchlight is never ideal.
There is another one being broken on ebay at the moment, so it might be worth dropping them a line too?
Hi m8
see what you can do and if the worst comes to the worst, I'll try and find them from somewhere else :)
Cheers
-
Wiggy, next time your oop north spare me a few hours ;)
You could come over to mine and we'll route through the boxes of bits I have left over from the Celica. I'm sure they will be there just dont know what they look like really and where to start LOL.
I'm sure with our 2 half brains on the job we can make a good crack at it :D
[/quote]
Hi Gaz
Yeah sounds good....Just been up as well
Be up again in a few weeks though ;)
-
i'm sure Stu don't mind me hijacking his for sale thread...
Anyhows, Rhino posted this pic a while ago on the DC.
According to my EPC,the ST165 / ST185 / ST205 share the same rear suspension bolts. Part numbers have been superceeded to the following:
http://i32.photobucket.com/albums/d38/skintbinlid/toe%20adjustment/ST165camberbolts.jpg
-
Nice one m8, so anyone breaking any 4 should be able to help then ;)
I may even go and get new ones from Toyota now :D :D
-
Wiggy,
Can I leave the bolts then? It'd save me grief and new ones would surely be preferable. Just got the mirror to send you now ;)
Stu
-
Yeah m8 no worries ;) I've asked the girlfriend to stop by Toyota on her way home tonight with a list of nuts and bolts to order :D (she drives past toyota and its miles away from where I work)
Let me know what I owe m8 and I'll fire over the cash ;) If you are going to throw it anyway, put the passenger side glass in as well......You never know, I may be needing one in future??
Cheers m8
-
You've spoiled the surprise now :D I was going to send you the passenger side as well anyway ;D Postage should only be a few quid at a guess, what to ask for the mirrors, haven't got a clue ::) You decide ;)
-
Dam, I like suprises as well ;D I'll pretend I never asked....hehehe
Once you've sent them, let me know cost and I'll send you over the money to cover, plus a bit extra for your effort and the mirrors....
Ohhh....just remembered....do you still have the power steering pump? Is it any good? wouldn't mind a spare to rebuild. Think mine is leaking. :(
-
Nope the ps pump is still with the block and that's gone back to Steve.
You'll need to let me have your address before I can post anything though ;)
-
PM sent :D
-
i'm sure Stu don't mind me hijacking his for sale thread...
Anyhows, Rhino posted this pic a while ago on the DC.
According to my EPC,the ST165 / ST185 / ST205 share the same rear suspension bolts. Part numbers have been superceeded to the following:
http://i32.photobucket.com/albums/d38/skintbinlid/toe%20adjustment/ST165camberbolts.jpg
Just ordered my new bolts.....WHAT A RIP OFF!!!
All the bolts in the picture, guess how much...
£96 *BLEEP*in quid......WTF.....I don't know how Toyota parts staff sleep at night....lol
Ohh well, at least it will be right now....
Whiteline ARB's on at the same time....and the LSD is going in :D
-
Sounds good and you'll soon be able to see what's been left behind you ;D
off to the post office tomorrow ;)
-
Shell gone, so nothing left :(
-
Hi Mate, Do you have the rear bumper still?