GT4EC - The GT-Four Enthusiasts Club
Trotters Paradise => Parts For Sale => Topic started by: kelt on April 27, 2007, 09:57:45 am
-
Hi, I need to make space in the garage so here's a few parts that someone may need:-
New Blueprint No.1 Tensioner Bearing £25 SOLD!
(http://i146.photobucket.com/albums/r276/wedibenni/185No.jpg)
Used Waterpump in excellent condition £25
(http://i146.photobucket.com/albums/r276/wedibenni/Waterpump.jpg)
Drivers side wide body wing £50
(http://i146.photobucket.com/albums/r276/wedibenni/Newwing.jpg)
Mocal 1/2 BSP oil pressure pipes £15
(http://i146.photobucket.com/albums/r276/wedibenni/Photo-0001.jpg)
FK Hubcentric spacers 20 mm wide £50
(http://i146.photobucket.com/albums/r276/wedibenni/Photo-0014.jpg)
Aussie 3 inch flexi pipe £120 SOLD!
(http://i146.photobucket.com/albums/r276/wedibenni/Aussieflexi.jpg)
Blitz Back box (Not the NUR spec!) £100
(http://i146.photobucket.com/albums/r276/wedibenni/Photo-0007-1.jpg)
(http://i146.photobucket.com/albums/r276/wedibenni/Photo-0006.jpg)
(http://i146.photobucket.com/albums/r276/wedibenni/Blitzbackbox.jpg)
7 stud head £250 Delivered! SOLD!
(http://i146.photobucket.com/albums/r276/wedibenni/7studhead185.jpg)
(http://i146.photobucket.com/albums/r276/wedibenni/7studhead.jpg)
also I have:-
A brand new Blue print cambelt £15 SOLD!
Complete standard airbox £25
Genuine Toyota Cambelt tensioner 91> with small milage £20 SOLD!
Inlet manifold £25
Aircon pump £ Free + postage costs
Aircon Rad £50
Coolant Rad (Small crack by top hose but works fine, looses half a litre per week but would probably seal with rad weld or something similar. Could get you out of trouble if yours is completely fubared) £30
Koyo Steering rack (Needs reconditioning) £50
All prices include P&p
Any questions feel free to ask!
Cheers Kelt
:)
-
Hiya Kelt.... i know i gotta pm from you on the water pump but not been able to read it on the gt4oc, as said before if you have the gasket for the pump will take it... let me know bud
-
Yeah, sorry mate no gasket, i did look and thought i had one but I cant find it i'm afraid :(
-
i'll have the Aussi flexi please if it's £120 posted .... :) :) :)
-
£120 posted to Salvageman! I've Pm'd you my details. :)
cheers Kelt
-
Hi Kelt cash sent via paypal mate.
-
Yes pay-pal is fine!
No cash has been recieved yet?
soon as it is i will get the Aussie posted to you.
:)
-
Right rechecked my paypal and i'd sent it to your hotmail .com instead of hotmail .co.uk so hopefully you should have it now. ::) ::)
-
:) Money recieved with thanks!
I shall get down the post office now and get it posted to you.
8)
Aussie Flexi is now SOLD
-
Right the Aussie has been shipped off to salvageman16! :)
BUMP!
Come on buy some quality parts that can be shipped off to you today/tommorrow!
If you think some are too steep, make me an offer i cant refuse, they have all gotta go!
;)
-
got the aussie today kelt , many thanks . i guess by all the bags you shop at LIDL's alot. :P
-
:-X ;D The cupboard under the sink was full of placcy bags and i was sick of them getting in the way so i thought they would be good suspension for your aussie while it was in transit.
Its the flat mate that shops in lidl, i shop in co-op mostly and i use my placcy bags for picking up my dog's you now what, hope you didn't get any of them by accident! ;D
8)
-
Kelt whats the crack with the mocal oil pressure pipes where do they fit too. i might be interested.
-
They are standard 1/2 bsp fittings with female ends, but they come with male to male fittings as well.
They will fit to any Mocal components such as:- sandwich plates, filter housings, oil coolers etc.
just tell where ever you buy the components that you have 1/2 bsp fittings and the inner pipe diameter is also 1/2 inch and outer diameter is 5/8.
They are good quality pipes and are a steal for £15.
-
hey up mate..can you get a clearer picture of pipes plz..