GT4EC - The GT-Four Enthusiasts Club
General Category => New to GT4EC? => Topic started by: jap-spec-performance on October 20, 2009, 12:36:45 pm
-
hi my names jamie and i run a japanese tuning part company based in scotland called jap-spec-performance (some of you will know me from other forums)
now im looking to trade on this lovely club, ive had a look about and cant find any mention of fee's etc, also i noticed some people have trader status yet others do not, yet are still trading. like oilman, hes a guest but advertising his items.
so is there a traders fee or is it simply an open sellers forum?
many thanks jamie.
-
:),..... I'm sure the 'team' will get back to you... going through erections at the moment... woops... elections (what's an r for an l) :)
-
PM sent ;)
-
welcome to the club. ;)
-
welcome to the club. ;)
dito
-
welcome to the club. ;)
dito
+1 ;)
-
welcome to the club. ;)
dito
+1 ;)
What they said ;)
-
welcome to the club. ;)
dito
+1 ;)
What they said ;)
As above ;D
-
thank you all for the welcomes and +1's lol :P
i recognise some of you from the gt4oc. i take it this is mainly 185 owners on here lol
-
NO :)
-
thank you all for the welcomes and +1's lol :P
i recognise some of you from the gt4oc. i take it this is mainly 185 owners on here lol
bit of all like the owners club a lot of irish lads on here for there sins lol
-
lol aw bless their little cotten socks lol
so whats fresh in the world of gt4ec, are you a friendly club or a cleeky (sp) club like GT-R OC lol
-
Hi jamie welcome to the club mate. Get some pics up of your Faff :)
Euan
-
hey buddy, ill get some up once im a proper member, this having to have posts validated is crap lol
-
:)
I'm wondering myself if this is now 'clickey'....
BUT I think we are a free thinking uninhibited club that allows nearly everything....(NOT BNP)...
only time will tell :)
-
well as per request lol
heres the JSP GT4 1/4 Mile Tuner Project
(http://www.jap-spec-performance.co.uk/projects/gt4/JSP-GT4.jpg)
We received the car in almost standard trim with a few small modifications.
The bodywork needed attention as did a few other areas but the engine was strong.
Standard Engine Bay
(http://www.jap-spec-performance.co.uk/projects/gt4/std-egn.jpg)
As you can see from the picture the engine was pretty standard with the exception
of the hks intake and filter.
After a little bit of work and servicing the engine now looks a little bit more interesting.
Current Engine Bay
(http://www.jap-spec-performance.co.uk/projects/gt4/current-egn.jpg)
Current Specification list:-
BodyWork / Exterior
Modified C-One Front Bumper
Eurou Aero Kit SideSkirts
Rays Volks TE37 Alloys In Custom Bronze
JSP Headlight Air Intake Vent
Interior
Momo Steering Wheel
AutoMeter Boost Gauge
Custom Gauge Mount
HKS Turbo Timer
Suspension / Chassis / Brakes
BC Coilovers (http://www.jap-spec-performance.co.uk/store/product_info.php?cPath=2_47_50&products_id=93)
EBC Grooved and Drilled Disks
EBC Yellow Stuff Pads
20mm rear spacers
JSP Battery Relocation Kit
WhiteLine Adjustable Rear ARB
JSP Poly Front ARB Bushes (http://www.jap-spec-performance.co.uk/store/product_info.php?cPath=2_47_50&products_id=91)
Superflex Trailing Arm Bushes (http://www.jap-spec-performance.co.uk/store/product_info.php?cPath=2_47_50&products_id=90)
Engine
Blitz NUR Spec R Exhaust System
JSP Prototype 2.5" Downpipe/De-Cat
HKS SSQV Blow Off Valve
JSP Ventilation Relocation Kit (VR KIT) (http://www.jap-spec-performance.co.uk/store/product_info.php?cPath=2_47_52_54&products_id=89)
JSP 4" Straight Air Intake Kit (http://www.jap-spec-performance.co.uk/store/product_info.php?cPath=2_47_52_54&products_id=49)
JSP Carbon / Aluminium Air Box
JSP Manual Boost Controller
JSP Gear Linkage Bush Kit
JSP Vacuum Distribution Manifold (VDM)
JSP Aluminium Heat Shield
Performance Stats
275bhp & 276lb/ft torque @ 1bar
13.03 1/4 mile time
(http://www.jap-spec-performance.co.uk/projects/gt4/quarter-slip.jpg)
Plenty more to come on the car, our aim is to build a torque Designed 1/4 mile car.
-
Very nice mate. How are you finding the BC coilovers so far?
-
right alot of research has been getting done but not alot of parts being fitted.
but the latest part is a datatool revlight, which ive stealth installed myself :up:
(http://img.photobucket.com/albums/v80/king_j/10001.jpg)
(http://img.photobucket.com/albums/v80/king_j/10002.jpg)
(http://img.photobucket.com/albums/v80/king_j/10003.jpg)
-
That looks amazing very cool idea I want one :)